ElmerFEMをアップデートしました ― 2022年10月28日 20:27
日本でのユーザーは少なそうですが、ElmerFEMに興味を持っている人はいます。
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
ElmerFEMのVirtualMachinesが10/11付けでアップデートされていました
新しいイメージもUbuntu20.04ベースのようです
現在の環境で
git fetch && git pull
./buildelmer.sh
を実行してみました
ElmerSoverとElmerGUIがかなりアップデートされました
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
構造解析などでオープンCAEの経験があれば、半年程度で使えるようになると思います。
SalomeやParaviewの経験がそのまま使えます。
Windows版の導入が最も楽ですが、本格的に使用するならフル機能かつgitバージョンの自動コンパイルスクリプト付きのVirtualMachinesが良いと思います。
ElmerFEM has been updated!
The following information was introduced on Twitter and received a "like" and "retweet" response.
There seem to be few users in Japan, but there are people who are interested in ElmerFEM.
・・・・・・・・・・・・・・・・・・・・・・・・・・
ElmerFEM's VirtualMachines was updated as of 10/11!
The new image also appears to be Ubuntu 20.04 based
I ran the following script in the current environment
git fetch && git pull
. /buildelmer.sh
ElmerSover and ElmerGUI have been updated considerably!
・・・・・・・・・・・・・・・・・・・・・・・・・・
If you have experience with open CAE for structural analysis, etc., you should be able to use it in about 6 months.
You can use your experience with Salome and Paraview as it is.
The Windows version is the easiest to install, but if you want to use it seriously, I think VirtualMachines with full functionality and git version with auto-compile scripts is good.
コメント
トラックバック
このエントリのトラックバックURL: http://unique-cae.asablo.jp/blog/2022/10/28/9536575/tb
※なお、送られたトラックバックはブログの管理者が確認するまで公開されません。
コメントをどうぞ
※メールアドレスとURLの入力は必須ではありません。 入力されたメールアドレスは記事に反映されず、ブログの管理者のみが参照できます。
※なお、送られたコメントはブログの管理者が確認するまで公開されません。