PCとアンプの接続ケーブルの音質確認方法2022年11月06日 18:43

安価に入手できるミニプラグ-RCAの接続ケーブルの品質が悪く、滲んでにぎやかな音になります。

PCに接続しているアンプにヘッドホン端子があれば、PCに直接接続した音とアンプのヘッドホン端子の音を比べて、アンプの音が悪ければ接続ケーブルが悪さをしている可能性が高いです。

ノイズをあまり気にせずに、メインとバックの音のクリアさなどから判断できると思います。

ケーブルの等価回路から考えて市販ケーブルが良いとは思えないので*、ハンダ付けの経験のある方は、自作をお勧めします。

*シールドは静電容量が大きくなり波形がなまる。静電容量が大きいと絶縁体による色付けが生じる。

私は、10月19日に紹介したケーブルを使用しています。
スピーカーケーブルは、10月22日に紹介したものです。
Windowsのfoobar2000よりも、UbuntuStudio 22.04上の jack + Audaciousの方が音が良いことが聞き取れます。foobar2000は音がぼけます。

How to check the sound quality of the connection cable between PC and amplifier

The quality of the mini-plug-RCA connection cable, which is available inexpensively, is poor, resulting in a blotchy, busy sound.

If the amplifier connected to the PC has a headphone jack, compare the sound directly connected to the PC with the sound from the headphone jack of the amplifier, and if the amplifier sounds bad, the connection cable is most likely bad.

You can judge this from the clarity of the main and background sound, etc., without worrying too much about noise.

Since I don't think commercial cables are good based on the equivalent circuit of the cable*, I recommend that you make your own if you have experience in soldering.

*Shielding increases capacitance and tames the waveform. Large capacitance causes coloration by the insulator.

I am using the cable introduced on October 19.
The speaker cable is the one introduced on October 22.
I can hear that jack + Audacious on UbuntuStudio 22.04 sounds better than foobar2000 on Windows. foobar2000 sounds blurry.

コメント

コメントをどうぞ

※メールアドレスとURLの入力は必須ではありません。 入力されたメールアドレスは記事に反映されず、ブログの管理者のみが参照できます。

※なお、送られたコメントはブログの管理者が確認するまで公開されません。

名前:
メールアドレス:
URL:
コメント:

トラックバック

このエントリのトラックバックURL: http://unique-cae.asablo.jp/blog/2022/11/06/9538896/tb

※なお、送られたトラックバックはブログの管理者が確認するまで公開されません。